|
|
|
National Stock Number:
5310-00-316-6015
Federal Supply Class:
5310
National Item Identification Number:
003166015
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 788717-1 | 96214 | RAYTHEON COMPANY | | IN762K | 32904 | IN SPECK CORP |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.092 INCHES NOMINAL | | OVERALL DIAMETER | 0.245 INCHES MINIMUM AND 0.250 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | SAE30301 ASSN STD 1ST MATERIAL RESPONSE AND SAE30302JGDSAE30316 ASSN STD 2ND MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL OVERALL | | PERIPHERAL SHAPE STYLE | DEE | | WIDTH | 0.197 INCHES MINIMUM AND 0.200 INCHES MAXIMUM | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | THICKNESS | 0.016 INCHES MINIMUM AND 0.025 INCHES MAXIMUM |
|
|