|
|
|
National Stock Number:
5310-00-324-7223
Federal Supply Class:
5310
National Item Identification Number:
003247223
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 7682-388 | 11871 | RECON/OPTICAL, INC. | | 7682-388 | 80294 | BOURNS INSTRUMENTS INC |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND W/FLATS | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.205 INCHES MINIMUM AND 0.210 INCHES MAXIMUM | | HOLE WIDTH ACROSS FLATS | 0.136 INCHES MINIMUM AND 0.141 INCHES MAXIMUM | | OVERALL DIAMETER | 0.432 INCHES MINIMUM AND 0.437 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 304 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | CAP-177 FSCM 11871 MFR REF SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | THICKNESS | 0.025 INCHES NOMINAL |
|
|