|
|
|
National Stock Number:
5310-00-333-6950
Federal Supply Class:
5310
National Item Identification Number:
003336950
Description:
NUT,PLAIN,ROUND
Detail:
A nut, circular in shape, which may have wrenching facilities such as flats, holes, protrusions, slots or splines in or on the periphery or in the face opposite the bearing surface. For items having a thickness (or height) exceeding two times the outside diameter, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. See also NUT (1), PLAIN, KNURLED. (When height or thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)
|
Manufacturer Information:
| 3151-054 | 60029 | WOODWARD HRT, INC. | | 3151-054 | 81873 | WOODWARD HRT INC |
|
Techincal Specification:
| DRILLED HOLE DIAMETER | 0.030 INCHES MINIMUM AND 0.034 INCHES MAXIMUM | | DRIVE POINT DEPTH | 0.074 INCHES NOMINAL | | DRIVE POINT QUANTITY | 4 | | DRIVE POINT WIDTH | 0.150 NOMINAL INCHES | | COUNTERSINK ANGLE | 90.0 DEGREES NOMINAL NUT | | HOLE CONFIGURATION STYLE | CONFIGURATION G | | HOLE TYPE AND QUANTITY | 4 DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-200/11,T73 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | ALUMINUM ALLOY 7075 OVERALL | | PROPRIETARY CHARACTERISTICS | PACS | | NOMINAL THREAD SIZE | 0.562 INCHES | | NUT DIAMETER | 0.703 INCHES MINIMUM AND 0.713 INCHES MAXIMUM | | NUT STYLE | ROUND | | NUT THICKNESS | 0.230 INCHES NOMINAL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | PS13201,TYPE 2,CLASS 1,FSCM 76301 MFR REF SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | ANODIZE OVERALL | | TEST DATA DOCUMENT | 81349-MIL-I-6866 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | THREAD CLASS | 3B | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 18 | | THREAD SERIES | UNJF |
|
|