|
|
|
National Stock Number:
5310-00-350-4291
Federal Supply Class:
5310
National Item Identification Number:
003504291
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 2176717 | 24617 | GENERAL MOTORS CORP | | 2176717 | 7X677 | GENERAL MOTORS LLC | | A213443 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM | | B85026 | 76760 | NEW VENTURE GEAR INC NEW PROCESS GEAR DIV |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.791 INCHES MINIMUM AND 0.801 INCHES MAXIMUM | | OVERALL DIAMETER | 1.172 INCHES MINIMUM AND 1.204 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | COPPER ALLOY 544 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | SPECIAL FEATURES | CHAMFER 0.031 IN. BY 45 DEG ON OD ONE SIDE ONLY | | THICKNESS | 0.092 INCHES MINIMUM AND 0.094 INCHES MAXIMUM |
|
|