|
|
|
National Stock Number:
5310-00-351-7892
Federal Supply Class:
5310
National Item Identification Number:
003517892
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 50260 | 82423 | KLEINSCHMIDT INC | | SCB69332 | 80063 | US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.672 INCHES MINIMUM AND 0.702 INCHES MAXIMUM | | OVERALL DIAMETER | 1.485 INCHES MINIMUM AND 1.515 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | C-F-206,TYPE 1,CL 16R1 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | WOOL COMP 16R1X OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | SPECIAL FEATURES | OD AND ID TO BE CONCENTRIC WITHIN 0.030 TOTAL INDICATOR READING | | THICKNESS | 0.031 INCHES MINIMUM AND 0.061 INCHES MAXIMUM |
|
|