|
|
|
National Stock Number:
5310-00-362-6765
Federal Supply Class:
5310
National Item Identification Number:
003626765
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 1858752 | 16764 | GENERAL MOTORS CORP DELCO REMY DIV | | 1858752 | 1LW55 | BORGWARNER PDS (ANDERSON), L.L.C. | | 1914583 | 16764 | GENERAL MOTORS CORP DELCO REMY DIV | | 1858752 | 24617 | GENERAL MOTORS CORP | | 1858752 | 72582 | ROLLS-ROYCE SOLUTIONS AMERICA INC | | 1858752 | 7X677 | GENERAL MOTORS LLC | | 850329 | 12603 | CLARK EQUIPMENT CO | | 1914583 | 1LW55 | BORGWARNER PDS (ANDERSON), L.L.C. | | 1914583 | 24617 | GENERAL MOTORS CORP | | 34389 | 54123 | COLSON CORP THE | | 1914583 | 7X677 | GENERAL MOTORS LLC | | 5830E9196 | 83299 | HYSTER-YALE GROUP, INC. | | 583K959 | 83299 | HYSTER-YALE GROUP, INC. | | 850329 | 89749 | CLARK MATERIAL HANDLING COMPANY | | 863973 | 12603 | CLARK EQUIPMENT CO | | 93G33 | 45152 | OSHKOSH CORP | | 93G33 | 75Q65 | OSHKOSH DEFENSE LLC | | 863973 | 89749 | CLARK MATERIAL HANDLING COMPANY |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.226 INCHES MINIMUM AND 0.230 INCHES MAXIMUM | | OVERALL DIAMETER | 0.562 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-633 CANC FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 1010 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | SURFACE TREATMENT | ZINC OVERALL | | THICKNESS | 0.029 INCHES MINIMUM AND 0.034 INCHES MAXIMUM |
|
|