|
|
|
National Stock Number:
5310-00-362-8889
Federal Supply Class:
5310
National Item Identification Number:
003628889
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 3214793 | 24617 | GENERAL MOTORS CORP | | 3214793 | 7X677 | GENERAL MOTORS LLC |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.755 INCHES MINIMUM AND 0.765 INCHES MAXIMUM | | OVERALL DIAMETER | 1.428 INCHES MINIMUM AND 1.448 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD ALL MATERIAL RESPONSES OVERALL | | MATERIAL | STEEL COMP 1015 OR STEEL COMP 4023 OR STEEL COMP 1020 OR STEEL COMP 1022 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | SPECIAL FEATURES | BREAK EDGE BOTH SIDES,0.010 IN. MAX,0.005 IN. MIN,FROM CENTER LINE | | THICKNESS | 0.178 INCHES MINIMUM AND 0.198 INCHES MAXIMUM |
|
|