|
|
|
National Stock Number:
5310-00-367-3717
Federal Supply Class:
5310
National Item Identification Number:
003673717
Description:
WASHER,RECESSED
Detail:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
|
Manufacturer Information:
| 65975 | 93835 | PARKER HANNIFIN CORPORATION |
|
Techincal Specification:
| HOLE DIAMETER | 0.252 INCHES MINIMUM AND 0.260 INCHES MAXIMUM | | OUTSIDE DIAMETER | 0.531 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | FED STD 66,AISI FED STD SINGLE MATERIAL RESPONSE OR FED STD 66 SAE 1330 FED STD 2ND MATERIAL RESPONSE OVERALL | | MATERIAL THICKNESS | 0.078 INCHES NOMINAL | | MATERIAL | STEEL OVERALL | | MINIMUM TENSILE STRENGTH | 125000 POUNDS PER SQUARE INCH | | PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT | | RECESS DIAMETER | 0.334 INCHES MINIMUM AND 0.344 INCHES MAXIMUM | | RECESS ANGLE | 90.0 DEGREES NOMINAL | | SPECIAL FEATURES | D SHAPE PERIPHERY 0.205 IN. FROM CENTER LINE TO FLAT SURFACE | | STYLE DESIGNATOR | RECESSED | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL |
|
|