|
|
|
National Stock Number:
5310-00-369-1269
Federal Supply Class:
5310
National Item Identification Number:
003691269
Description:
NUT,SLEEVE
Detail:
AN INTERNALLY THREADED ITEM WITH A CYLINDRICAL AND/OR SQUARE, HEXAGONAL, OCTAGONAL, OR DODECAGONAL OUTER PERIPHERY (PARALLEL TO THE THREADED AXIS) A PORTION(S) OF WHICH MAY OR MAY NOT BE ENLARGED, FORMING A FLANGE(S) AND/OR SHOULDER(S). ITEMS NOT HAVING AN ENLARGED OUTER PORTION MAY BE THREADED, A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS HAVING AN ENLARGED OUTER PORTION (FLANGE(S) OR SHOULDER(S)) MAY BE THREADED THE FULL LENGTH, THREADED A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS TAPPED FROM BOTH ENDS SHALL HAVE EITHER RIGHT-HAND THREADS ON BOTH ENDS OR LEFT-HAND THREADS ON BOTH ENDS. FOR ITEMS CONFORMING TO ANY OF THE ABOVE AND HAVING A LENGTH OVERALL EXCEEDING TWO TIMES THE LARGEST OUTSIDE DIAMETER OR WIDTH ACROSS FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. FOR ITEMS WITH AN OUTSIDE CONTOUR THAT IS THE SAME THE FULL LENGTH, HAVING A CONTINUOUS THREAD THROUGH ITS ENTIRE LENGTH, AND THE LENGTH DOES NOT EXCEED TWO TIMES THE DIAMETER OR WIDTH ACROSS THE FLATS USE NUT (1), PLAIN (AS MODIFIED). EXCLUDES NUT (1), PLAIN, CAP. SEE ALSO TURNBUCKLE BODY.
|
Manufacturer Information:
| 164B6583P1 | 89954 | BAE SYSTEMS CONTROLS INC. |
|
Techincal Specification:
| BOSS THICKNESS | 0.070 INCHES MINIMUM AND 0.090 INCHES MAXIMUM OVERALL | | BOSS DIAMETER | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM OVERALL | | COUNTERBORE DIAMETER | 0.1250 INCHES MINIMUM AND 0.1252 INCHES MAXIMUM NUT | | CROSS-SECTIONAL SHAPE | ROUND FLANGE | | CROSS-SECTIONAL SHAPE | ROUND NUT | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-764,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 303 OVERALL | | NOMINAL THREAD SIZE | 0.112 INCHES | | NUT DIAMETER | 0.440 INCHES MINIMUM AND 0.460 INCHES MAXIMUM | | NUT COUNTERBORE DEPTH | 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM NUT | | NUT LENGTH | 0.160 INCHES MINIMUM AND 0.190 INCHES MAXIMUM | | NUT STYLE | SLEEVE | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | THREAD CLASS | 2B | | THREAD DIRECTION | RIGHT-HAND | | THREAD SERIES | UNC | | THREAD QUANTITY PER INCH | 40 |
|
|