| CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | 1.138 INCHES MINIMUM AND 1.142 INCHES MAXIMUM |
| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM NUT |
| DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER | 0.565 INCHES MINIMUM AND 0.575 INCHES MAXIMUM |
| LOCKING FEATURE | PREVAILING TORQUE ALL METAL DESIGN |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5735 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | IRON ALLOY 660 OVERALL |
| MOUNTING HOLE ARRANGEMENT STYLE | 2 HOLES |
| MOUNTING HOLE COUNTERSINK ANGLE | 98.0 DEGREES MINIMUM AND 102.0 DEGREES MAXIMUM |
| MOUNTING HOLE DIAMETER | 0.098 INCHES MINIMUM AND 0.113 INCHES MAXIMUM |
| MOUNTING PROVISION LOCATION | OPPOSITE NUT PROJECTION SIDE |
| NOMINAL THREAD SIZE | 0.190 INCHES |
| NUT HEIGHT | 0.265 INCHES MAXIMUM |
| NUT LENGTH | 1.530 INCHES MAXIMUM |
| NUT MOUNTING PROVISION | COUNTERSUNK HOLES |
| NUT STYLE | PLATE |
| PLATE THICKNESS | 0.055 INCHES MINIMUM AND 0.075 INCHES MAXIMUM |
| PLATE WIDTH | 0.377 INCHES MAXIMUM |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2411 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | SILVER OVERALL |
| THREAD CLASS | 3B |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD SERIES | UNJF |
| THREAD QUANTITY PER INCH | 32 |