|
|
|
National Stock Number:
5310-00-377-4853
Federal Supply Class:
5310
National Item Identification Number:
003774853
Description:
WASHER,RECESSED
Detail:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
|
Manufacturer Information:
| 2803L480 | 28158 | HME, INC. | | 2803L480 | 3D6E9 | MERITOR INDUSTRIAL PRODUCTS, LLC | | 398G22 | 45152 | OSHKOSH CORP | | 398G22 | 75Q65 | OSHKOSH DEFENSE LLC | | 2803L480 | 78500 | MERITOR HEAVY VEHICLE SYSTEMS, LLC |
|
Techincal Specification:
| HOLE DIAMETER | 2.156 INCHES NOMINAL | | OUTSIDE DIAMETER | 2.625 INCHES NOMINAL | | OVERALL HEIGHT | 0.193 INCHES MINIMUM AND 0.195 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-633 CANC FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL THICKNESS | 0.193 INCHES MINIMUM AND 0.195 INCHES MAXIMUM | | MATERIAL | STEEL COMP 1045 OVERALL | | RECESS DIAMETER | 2.281 INCHES NOMINAL | | RECESS ANGLE | 45.0 DEGREES NOMINAL | | RECESS DEPTH | 0.062 INCHES NOMINAL | | STYLE DESIGNATOR | RECESSED |
|
|