|
|
|
National Stock Number:
5310-00-387-9453
Federal Supply Class:
5310
National Item Identification Number:
003879453
Description:
NUT,SLEEVE
Detail:
AN INTERNALLY THREADED ITEM WITH A CYLINDRICAL AND/OR SQUARE, HEXAGONAL, OCTAGONAL, OR DODECAGONAL OUTER PERIPHERY (PARALLEL TO THE THREADED AXIS) A PORTION(S) OF WHICH MAY OR MAY NOT BE ENLARGED, FORMING A FLANGE(S) AND/OR SHOULDER(S). ITEMS NOT HAVING AN ENLARGED OUTER PORTION MAY BE THREADED, A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS HAVING AN ENLARGED OUTER PORTION (FLANGE(S) OR SHOULDER(S)) MAY BE THREADED THE FULL LENGTH, THREADED A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS TAPPED FROM BOTH ENDS SHALL HAVE EITHER RIGHT-HAND THREADS ON BOTH ENDS OR LEFT-HAND THREADS ON BOTH ENDS. FOR ITEMS CONFORMING TO ANY OF THE ABOVE AND HAVING A LENGTH OVERALL EXCEEDING TWO TIMES THE LARGEST OUTSIDE DIAMETER OR WIDTH ACROSS FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. FOR ITEMS WITH AN OUTSIDE CONTOUR THAT IS THE SAME THE FULL LENGTH, HAVING A CONTINUOUS THREAD THROUGH ITS ENTIRE LENGTH, AND THE LENGTH DOES NOT EXCEED TWO TIMES THE DIAMETER OR WIDTH ACROSS THE FLATS USE NUT (1), PLAIN (AS MODIFIED). EXCLUDES NUT (1), PLAIN, CAP. SEE ALSO TURNBUCKLE BODY.
|
Manufacturer Information:
| 26025 | 29201 | JOHN DEER CONSUMER PRODUCTS INC | | 4666 | 79575 | WICO-PRESTOLITE CO THE DIV OF ELTRA CORP | | WCE4666 | 29201 | JOHN DEER CONSUMER PRODUCTS INC |
|
Techincal Specification:
| COUNTERSINK ANGLE | 60.0 DEGREES NOMINAL FLANGE | | CROSS-SECTIONAL SHAPE | ROUND W/WRENCH FLATS NUT | | FLANGE DIAMETER | 0.938 INCHES NOMINAL | | FLANGE THICKNESS | 0.125 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 1212 OVERALL | | NOMINAL THREAD SIZE | 0.438 INCHES | | NUT DIAMETER | 0.730 INCHES MINIMUM AND 0.740 INCHES MAXIMUM | | NUT LENGTH | 0.687 INCHES NOMINAL | | NUT STYLE | SLEEVE | | SURFACE TREATMENT | ZINC AND DICHROMATE OVERALL | | THREAD CLASS | 2B | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.682 INCHES MINIMUM AND 0.692 INCHES MAXIMUM | | THREAD SERIES | UNF | | THREAD QUANTITY PER INCH | 20 |
|
|