| CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | 0.466 INCHES MINIMUM AND 0.470 INCHES MAXIMUM |
| COUNTERBORE DIAMETER | 0.168 INCHES MINIMUM NUT |
| DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER | 0.229 INCHES MINIMUM AND 0.239 INCHES MAXIMUM |
| LOCKING FEATURE | PREVAILING TORQUE ALL METAL DESIGN |
| OVERALL HEIGHT | 0.508 INCHES MINIMUM AND 0.538 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5510 ASSN STD 1ST MATERIAL RESPONSE OR AMS 5525 ASSN STD 2ND MATERIAL RESPONSE SHELL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5525 ASSN STD SINGLE MATERIAL RESPONSE NUT |
| MATERIAL | STEEL COMP 321 OR IRON ALLOY 660 CAP |
| MATERIAL | STEEL COMP 321 OR IRON ALLOY 660 SHELL |
| MOUNTING HOLE ARRANGEMENT STYLE | 2 HOLES |
| MOUNTING HOLE DIAMETER | 0.098 INCHES MINIMUM AND 0.103 INCHES MAXIMUM |
| NOMINAL THREAD SIZE | 0.164 INCHES |
| NUT COUNTERBORE DEPTH | 0.063 INCHES MINIMUM NUT |
| NUT HEIGHT | 0.250 INCHES NOMINAL |
| NUT LENGTH | 0.686 INCHES MAXIMUM |
| NUT MOUNTING PROVISION | STRAIGHT HOLES |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT |
| PLATE THICKNESS | 0.025 INCHES NOMINAL |
| PLATE WIDTH | 0.367 INCHES MAXIMUM |
| PRECIOUS MATERIAL | SILVER |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2410 ASSN STD SINGLE TREATMENT RESPONSE SHELL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2410 ASSN STD SINGLE TREATMENT RESPONSE CAP |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE NUT |
| TEMP RATING | 800.0 FAHRENHEIT NOMINAL |
| THREAD CLASS | 3B |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD SERIES | UNJC |
| THREAD QUANTITY PER INCH | 32 |