|
|
|
National Stock Number:
5310-00-390-0612
Federal Supply Class:
5310
National Item Identification Number:
003900612
Description:
WASHER,RECESSED
Detail:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
|
Manufacturer Information:
| 092-62989 | 94697 | MOOG INC | | 092-62989 | 9P5N5 | MOOG MILITARY AIRCRAFT LLC |
|
Techincal Specification:
| HEAT TREATMENT | AS FABRICATED | | HOLE DIAMETER | 0.190 INCHES MINIMUM AND 0.191 INCHES MAXIMUM | | OUTSIDE DIAMETER | 0.427 INCHES MINIMUM AND 0.447 INCHES MAXIMUM | | OVERALL HEIGHT | 0.061 INCHES MINIMUM AND 0.063 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-862 ANNEALED MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL THICKNESS | 0.061 INCHES MINIMUM AND 0.063 INCHES MAXIMUM | | MATERIAL | STEEL COMP 324 OVERALL | | RECESS DIAMETER | 0.255 INCHES MINIMUM AND 0.260 INCHES MAXIMUM | | RECESS ANGLE | 85.0 DEGREES MINIMUM AND 95.0 DEGREES MAXIMUM | | RECESS DEPTH | 0.032 INCHES MINIMUM AND 0.035 INCHES MAXIMUM | | STYLE DESIGNATOR | RECESSED | | SURFACE FINISH | 63.0 MICROINCHES ALL SURFACES | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | E+1204 FSCM 94697 MFR REF SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL |
|
|