|
|
|
National Stock Number:
5310-00-390-1704
Federal Supply Class:
5310
National Item Identification Number:
003901704
Description:
NUT,PLAIN,CAP
Detail:
AN ITEM INTERNALLY THREADED FROM ONE END, AND COMPLETELY INCLOSED ON THE OPPOSITE END. THE OUTER PERIPHERY PARALLEL TO THE THREADED AXIS MAY BE SQUARE, CYLINDRICAL, HEXAGONAL, OCTAGONAL, OR DODECAGONAL AND TAPER TO A CONE OR DOME SHAPE ON THE CLOSED END. FOR LIKE ITEMS WHICH ARE STAMPED OR FORMED FROM SHEET STOCK, SEE NUT (1), STAMPED. FOR SIMILAR ITEMS WHICH ARE FLAT ON TOP AND BOTTOM SEE NUT (1), SLEEVE OR POST, ELECTRICAL-MECHANICAL EQUIPMENT.
|
Manufacturer Information:
| 556032-1 | 73030 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| DRILLED HOLE DIAMETER | 0.047 INCHES NOMINAL | | BEARING SURFACE TYPE | FLAT | | COUNTERBORE DIAMETER | 0.896 INCHES MINIMUM AND 0.906 INCHES MAXIMUM NUT | | COUNTERSINK ANGLE | 85.0 DEGREES MINIMUM AND 95.0 DEGREES MAXIMUM NUT | | HOLE CONFIGURATION STYLE | CONFIGURATION B | | HOLE TYPE AND QUANTITY | 2 DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 347 OVERALL | | NOMINAL THREAD SIZE | 0.875 INCHES | | NUT COUNTERBORE DEPTH | 0.102 INCHES NOMINAL NUT | | NUT HEIGHT | 0.480 INCHES NOMINAL | | NUT STYLE | CAP | | WIDTH ACROSS FLATS | 0.996 INCHES MINIMUM AND 1.003 INCHES MAXIMUM | | THREAD CLASS | 3B | | THREAD DIRECTION | RIGHT-HAND | | THREAD SERIES | UNJEF | | THREAD QUANTITY PER INCH | 20 |
|
|