|
|
|
National Stock Number:
5310-00-471-5557
Federal Supply Class:
5310
National Item Identification Number:
004715557
Description:
NUT SPACER,PLATE
Detail:
AN ITEM HAVING TWO FLAT BEARING SURFACES, CONFORMING TO THE SAME SHAPE AS THE BASE OF A NUT (1), PLAIN, PLATE AND NUT (1), SELF-LOCKING, PLATE. IT IS USED TO PROVIDE BETTER ALIGNMENT IN ASSEMBLY.
|
Manufacturer Information:
| 216-21670-1 | 80378 | TRIUMPH AEROSTRUCTURES, LLC |
|
Techincal Specification:
| MATERIAL | ALUMINUM ALLOY 5052 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/8,H34 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | NUT STYLE | PLATE NUT SPACER | | NUT LENGTH | 0.709 INCHES MINIMUM AND | | 0.724 INCHES MAXIMUM | | THRU-HOLE DIAMETER | 0.210 INCHES MINIMUM AND | | 0.220 INCHES MAXIMUM | | PLATE THICKNESS | 0.057 INCHES MINIMUM AND | | 0.069 INCHES MAXIMUM | | PLATE WIDTH | 0.313 INCHES MINIMUM AND | | 0.328 INCHES MAXIMUM | | NUT MOUNTING PROVISION | COUNTERSUNK HOLES | | MOUNTING HOLE COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL | | MOUNTING PROVISION LOCATION | OPPOSITE NUT PROJECTION SIDE | | MOUNTING HOLE ARRANGEMENT STYLE | 2 HOLES | | MOUNTING HOLE DIAMETER | 0.102 INCHES MINIMUM AND | | 0.108 INCHES MAXIMUM | | DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER | 0.247 INCHES MINIMUM AND | | 0.253 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | 0.498 INCHES MINIMUM AND | | 0.502 INCHES MAXIMUM | | SPECIAL FEATURES | BLACK ENAMEL 373 FSCM 80378 | | PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT |
|
|