|
|
|
National Stock Number:
5310-00-477-0166
Federal Supply Class:
5310
National Item Identification Number:
004770166
Description:
WASHER,SHOULDERED AND RECESSED
Detail:
A washer, round in shape, having a centrally located hole. One bearing surface is flat, the other surface is in the form of a raised shoulder (boss) having a flat bearing surface. Either or both of the bearing surfaces must be broken by a counterbore, countersink, or similar shaped recess. The thickness of the shoulder (boss) must not exceed 25 percent of the shoulder (boss) diameter. For items having a shoulder (boss) of greater thickness, use BEARING, SLEEVE; BUSHING, SLEEVE; or SPACER, SLEEVE. Excludes INSULATOR, WASHER and thrust type washers.
|
Manufacturer Information:
| 151888-1 | 18967 | DYNAMATIC CORP |
|
Techincal Specification:
| MATERIAL | STEEL OVERALL | | STYLE DESIGNATOR | SHOULDERED AND RECESSED | | HOLE DIAMETER | 0.670 INCHES MINIMUM AND | | 0.671 INCHES MAXIMUM | | SHOULDER DIAMETER | 0.940 INCHES NOMINAL | | OUTSIDE DIAMETER | 1.565 INCHES MINIMUM AND | | 1.570 INCHES MAXIMUM | | SHOULDER HEIGHT | 0.010 INCHES MINIMUM AND | | 0.015 INCHES MAXIMUM | | MATERIAL THICKNESS | 0.030 INCHES NOMINAL | | RECESS ANGLE | 90.0 DEGREES NOMINAL | | SURFACE FINISH | 40.0 MICROINCHES TOP | | 100.0 MICROINCHES BOTTOM | | 100.0 MICROINCHES COUNTERBORE WALL | | 100.0 MICROINCHES INNER | | 100.0 MICROINCHES OUTER | | 100.0 MICROINCHES SHOULDER FACE | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 18967 | | DESIGN CONTROL REFERENCE | 151888-1 |
|
|