|
|
|
National Stock Number:
5310-00-499-3458
Federal Supply Class:
5310
National Item Identification Number:
004993458
Description:
WASHER,RECESSED
Detail:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
|
Manufacturer Information:
| 22033-1 | 08484 | BREEZE-EASTERN LLC | | 2637507-4 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH | | 2637507PC4 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER |
|
Techincal Specification:
| MATERIAL | STEEL COMP 630 OVERALL | | HARDNESS RATING | 36.0 ROCKWELL C MINIMUM AND | | 42.0 ROCKWELL C MAXIMUM | | STYLE DESIGNATOR | RECESSED BOTH SIDES | | HOLE DIAMETER | 0.317 INCHES MINIMUM AND | | 0.322 INCHES MAXIMUM | | OUTSIDE DIAMETER | 0.740 INCHES MINIMUM AND | | 0.760 INCHES MAXIMUM | | MATERIAL THICKNESS | 0.065 INCHES MINIMUM AND | | 0.075 INCHES MAXIMUM | | TOP RECESS DIAMETER | 0.357 INCHES MINIMUM AND | | 0.362 INCHES MAXIMUM | | BOTTOM RECESS DIAMETER | 0.357 INCHES MINIMUM AND | | 0.362 INCHES MAXIMUM | | BOTTOM RECESS ANGLE | 45.0 DEGREES NOMINAL | | TOP RECESS ANGLE | 45.0 DEGREES NOMINAL | | SURFACE FINISH | 63.0 MICROINCHES TOP | | 63.0 MICROINCHES BOTTOM | | HEAT TREATMENT | ANNEALED | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 10001 | | DESIGN CONTROL REFERENCE | 2637507PC4 |
|
|