|
|
|
National Stock Number:
5310-00-500-1575
Federal Supply Class:
5310
National Item Identification Number:
005001575
Description:
WASHER,RECESSED
Detail:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
|
Manufacturer Information:
| LS9672C12C | 98897 | LOCKHEED MARTIN CORP |
|
Techincal Specification:
| MATERIAL | STEEL OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5525 ASSN STD SINGLE MATERIAL RESPONSE OR | | AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | STYLE DESIGNATOR | RECESSED | | HOLE DIAMETER | 0.757 INCHES MINIMUM AND | | 0.770 INCHES MAXIMUM | | OUTSIDE DIAMETER | 1.240 INCHES MINIMUM AND | | 1.260 INCHES MAXIMUM | | RECESS DIAMETER | 0.890 INCHES MINIMUM AND | | 0.910 INCHES MAXIMUM | | MATERIAL THICKNESS | 0.068 INCHES MINIMUM AND | | 0.088 INCHES MAXIMUM | | RECESS ANGLE | 44.0 DEGREES MINIMUM AND | | 46.0 DEGREES MAXIMUM | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 98897 | | DESIGN CONTROL REFERENCE | LS9672C12C |
|
|