|
|
|
National Stock Number:
5310-00-505-2370
Federal Supply Class:
5310
National Item Identification Number:
005052370
Description:
WASHER,RECESSED
Detail:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
|
Manufacturer Information:
| 732048-5 | 73030 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| MATERIAL | STEEL COMP 304 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5513 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | STYLE DESIGNATOR | RECESSED BOTH SIDES | | HOLE DIAMETER | 0.467 INCHES MINIMUM AND | | 0.474 INCHES MAXIMUM | | OUTSIDE DIAMETER | 0.675 INCHES MINIMUM AND | | 0.685 INCHES MAXIMUM | | MATERIAL THICKNESS | 0.0175 INCHES MINIMUM AND | | 0.0185 INCHES MAXIMUM | | BOTTOM RECESS ANGLE | 85.0 DEGREES MINIMUM AND | | 95.0 DEGREES MAXIMUM | | TOP RECESS ANGLE | 85.0 DEGREES MINIMUM AND | | 95.0 DEGREES MAXIMUM | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 73030 | | DESIGN CONTROL REFERENCE | 732048-5 |
|
|