|
|
|
National Stock Number:
5310-00-512-6507
Federal Supply Class:
5310
National Item Identification Number:
005126507
Description:
NUT,PLAIN,ROUND
Detail:
A nut, circular in shape, which may have wrenching facilities such as flats, holes, protrusions, slots or splines in or on the periphery or in the face opposite the bearing surface. For items having a thickness (or height) exceeding two times the outside diameter, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. See also NUT (1), PLAIN, KNURLED. (When height or thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)
|
Manufacturer Information:
| 501-3132-1 | 96682 | GENISCO TECHNOLOGY CORPORATION |
|
Techincal Specification:
| THREAD SERIES | UNS | | NOMINAL THREAD SIZE | 1.140 INCHES | | THREAD QUANTITY PER INCH | 40 | | THREAD PITCH DIAMETERS | 0.2300 TO 0.2329 INCHES | | THREAD DIRECTION | RIGHT-HAND | | MATERIAL | ALUMINUM ALLOY 6061 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-200/8,T6 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | ANODIZE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TY 1,CL 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | NUT STYLE | ROUND | | NUT DIAMETER | 0.690 INCHES NOMINAL | | NUT THICKNESS | 0.200 INCHES NOMINAL | | WIDTH ACROSS FLATS | 0.375 INCHES NOMINAL | | HOLE CONFIGURATION STYLE | CONFIGURATION J | | HOLE TYPE AND QUANTITY | 2 DRILLED | | DRILLED HOLE DIAMETER | 0.069 INCHES MINIMUM AND | | 0.078 INCHES MAXIMUM | | COUNTERSINK ANGLE | 45.0 DEGREES NOMINAL NUT | | PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT |
|
|