|
|
|
National Stock Number:
5310-00-521-5080
Federal Supply Class:
5310
National Item Identification Number:
005215080
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 327327 | 65282 | WHITE MOTOR CORP |
|
Techincal Specification:
| MATERIAL | STEEL COMP 1212 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | SPDP226 FSCM 65282 MFR REF 1ST MATERIAL RESPONSE OR | | SDP238 FSCM65282 MFR REF 1ST MATERIAL RESPONSE AND | | SAE ASSN STD 2ND MATERIAL RESPONSE AND | | SAE ASSN STD 3RD MATERIAL RESPONSE OVERALL | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 0.406 INCHES NOMINAL | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 0.656 INCHES NOMINAL | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.093 INCHES NOMINAL |
|
|