|
|
|
National Stock Number:
5310-00-575-6737
Federal Supply Class:
5310
National Item Identification Number:
005756737
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 10125607 | 05875 | CONTROL DATA CORP COMPUTER PERIPHERALS INC | | 10125607 | 19333 | MAGNETIC PERIPHERALS INC NORMANDALE OPNS SUB OF CONTROL DATA CORP | | 10125607 | 58536 | FEDERAL COMMERCIAL ITEM DESCRIPTION PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC |
|
Techincal Specification:
| MATERIAL | STEEL CORROSION RESISTING OVERALL | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 0.203 INCHES NOMINAL | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 0.548 INCHES NOMINAL | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.055 INCHES NOMINAL | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 05875 | | DESIGN CONTROL REFERENCE | 10125607 |
|
|