|
|
|
National Stock Number:
5310-00-582-9152
Federal Supply Class:
5310
National Item Identification Number:
005829152
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| S124682-12D18-3 | 05360 | BLAISDELL MFG INC | | S124682-12D18-3 | 0P012 | H. V. MODY, INC. | | S124682-12D18-3 | 10630 | ANILLO INDUSTRIES LLC | | S124682-12D18-3 | 18355 | THE BOEING COMPANY | | S124682-12D18-3 | 58009 | MOELLER MANUFACTURING & SUPPLY, LLC | | S124682-12D18-3 | 70265 | ALL POWER MANUFACTURING CO. | | S8157C59+032A | 70210 | HONEYWELL INTERNATIONAL INC. | | S124682-12D18-3 | 88277 | THE BOEING COMPANY |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.760 INCHES MINIMUM AND 0.780 INCHES MAXIMUM | | OVERALL DIAMETER | 1.120 INCHES MINIMUM AND 1.140 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/11 T6 COND T FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | ALUMINUM ALLOY 6061 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | ANODIZE OR CHROMATE OVERALL | | THICKNESS | 0.029 INCHES MINIMUM AND 0.035 INCHES MAXIMUM |
|
|