|
|
|
National Stock Number:
5310-00-584-3782
Federal Supply Class:
5310
National Item Identification Number:
005843782
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 001-5188-019 | 58657 | LEACH INTERNATIONAL CORP | | 004-003081-010 | 26916 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 4197410-025 | 05869 | RAYTHEON COMPANY | | 153-0013-003 | 94756 | THE BOEING COMPANY | | 411R641H01 | 97942 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 4197410-25 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH | | 945723-2041 | 06481 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 8190903 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND | | AN960C4L | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | 5310PL0139707 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | 5310PL1369299 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | AN960C4L | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | DEPARTURE FROM CITED DESIGNATOR | AS MODIFIED BY FINISH AND OUTSIDE DIA | | HOLE DIAMETER | 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM | | OVERALL DIAMETER | 0.257 INCHES MINIMUM AND 0.262 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5059 MIL SPEC 1ST MATERIAL RESPONSE AND MIL-S-6721 MIL SPEC 2ND MATERIAL RESPONSE AND MIL-S-6721 MIL SPEC 3RD MATERIAL RESPONSE AND MIL-S-6721 MIL SPEC 4TH MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL CORROSION RESISTING OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | SURFACE TREATMENT | PASSIVATE OVERALL | | THICKNESS | 0.006 INCHES MINIMUM AND 0.026 INCHES MAXIMUM |
|
|