|
|
|
National Stock Number:
5310-00-584-5542
Federal Supply Class:
5310
National Item Identification Number:
005845542
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 10266 | 05852 | BARNSTEAD THERMOLYNE CORPORATION DBA BARNSTEAD INTERNATIONAL DIV LABORATORY EQUIPMENT | | 327313 | 11449 | TURBO POWER & MARINE SYSTEM INC SUB OF UNITED TECHNOLOGIES CORP | | 327313 | 77445 | RTX CORPORATION | | 327313 | 99321 | PARKER HANNIFIN CORP | | 327313 | JA269 | TOKYO JUDOI KOGYO K.K. | | 327313 | S0554 | TOKYO JUDOGI KOGYO CO. | | EA37 | 05852 | BARNSTEAD THERMOLYNE CORPORATION DBA BARNSTEAD INTERNATIONAL DIV LABORATORY EQUIPMENT | | Q8C1260-4 | 0WLU1 | GENERAL DYNAMICS CORP CONVAIR DIV LINDBERGH FIELD FACILITY | | 68801-058 | 12436 | BAE SYSTEMS INFORMATION AND ELECTRONIC SYSTEMS INTEGRATION INC. | | Q8C1260-4 | 15090 | RAYTHEON COMPANY | | Q8C1260-4 | 63910 | BAE SYSTEMS INFORMATION AND ELECTRONIC SYSTEMS INTEGRATION I |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.385 INCHES MINIMUM AND 0.395 INCHES MAXIMUM | | OVERALL DIAMETER | 0.885 INCHES MINIMUM AND 0.905 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5515 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 302 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | SURFACE TREATMENT | PASSIVATE OVERALL | | THICKNESS | 0.059 INCHES MINIMUM AND 0.065 INCHES MAXIMUM |
|
|