5310-00-584-5608, WASHER,FLAT

National Stock Number:
5310-00-584-5608

Federal Supply Class:
5310

National Item Identification Number:
005845608

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Manufacturer Information:

AN960PD1816L	88044	AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE
AN960PD1816L	9M264	GFC INDUSTRIES INC

Techincal Specification:

MATERIAL	ALUMINUM ALLOY 2024 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-250/5,ALCLAD FED SPEC SINGLE MATERIAL RESPONSE OVERALL
SURFACE TREATMENT	CHROMATE OR
	ANODIZE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-C-5541 MIL SPEC 1ST TREATMENT RESPONSE OR
	MIL-A-8625 MIL SPEC 2ND TREATMENT RESPONSE OVERALL
CENTER HOLE SHAPE STYLE	ROUND
HOLE DIAMETER	1.130 INCHES MINIMUM AND
	1.150 INCHES MAXIMUM
PERIPHERAL SHAPE STYLE	ROUND
OVERALL DIAMETER	1.870 INCHES MINIMUM AND
	1.895 INCHES MAXIMUM
CROSS-SECTIONAL SHAPE STYLE	RECTANGULAR
THICKNESS	0.013 INCHES MINIMUM AND
	0.019 INCHES MAXIMUM
NONDEFINITIVE SPEC/STD DATA	A TYPE AND
	2 GRADE AND
	D CLASS
SPEC/STD CONTROLLING DATA
MANUFACTURERS CODE	88044
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE	AN960PD1816L

Click here to Register for Free 30-day Trial