|
|
|
National Stock Number:
5310-00-585-3243
Federal Supply Class:
5310
National Item Identification Number:
005853243
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| AN122588 | 88044 | AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE | | MS-9320-16 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH | | MS9320-16 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | MS9320-16 | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC | | MS9320-16 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HARDNESS RATING | 35.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM | | HOLE DIAMETER | 0.646 INCHES MINIMUM AND 0.661 INCHES MAXIMUM | | OVERALL DIAMETER | 1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6350 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 4130 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | SURFACE FINISH | 63.0 MICROINCHES BOTTOM | | SURFACE FINISH | 63.0 MICROINCHES TOP | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS2416 ASSN STD SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | NICKEL OVERALL | | THICKNESS | 0.136 INCHES MINIMUM AND 0.146 INCHES MAXIMUM |
|
|