3130-00-585-9624 BEARING UNIT,BALL Index 5310-00-585-9630 WASHER,FLAT

National Stock Number:
5310-00-585-9626

Federal Supply Class:
5310

National Item Identification Number:
005859626

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.


Manufacturer Information:
13024470408AT AND T CORP
568-1006-0725583L3HARRIS AVIATION PRODUCTS, INC
CAV10-134B11871RECON/OPTICAL, INC.
S8157N69-01659364HONEYWELL INTERNATIONAL INC.
S8157N69-01670210HONEYWELL INTERNATIONAL INC.
S8157N69-01672599ALLIEDSIGNAL INC DBA ALLIED-SIGNAL AEROSPACE CO
S8157N69-01699193HONEYWELL INTERNATIONAL INC.


Techincal Specification:
CENTER HOLE SHAPE STYLEROUND
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
HOLE DIAMETER0.149 INCHES MINIMUM AND 0.154 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5059 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-5059 MIL SPEC 2ND MATERIAL RESPONSE OVERALL OR MIL-S-5059 MIL SPEC 3RD MATERIAL RESPONSE OVERALL OR AMS55108 ASSN STD 4TH MATERIAL RESPONSE OVERALL OR ASTM A582 ASSN STD 5TH MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP 301 OVERALL OR STEEL COMP 302 OVERALL OR STEEL COMP 316 OVERALL OR STEEL COMP 321 OVERALL OR STEEL COMP 303 OVERALL
PERIPHERAL SHAPE STYLEROUND
PROPRIETARY CHARACTERISTICSPACS
OVERALL DIAMETER0.270 INCHES MINIMUM AND 0.280 INCHES MAXIMUM
SPECIFICATION/STANDARD DATA70210-S8157 MANUFACTURERS STANDARD
THICKNESS0.016 INCHES NOMINAL


Click here to Register for Free 30-day Trial