|
|
|
National Stock Number:
5310-00-595-5092
Federal Supply Class:
5310
National Item Identification Number:
005955092
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 5150238 | 24617 | GENERAL MOTORS CORP | | 5150238 | 72582 | ROLLS-ROYCE SOLUTIONS AMERICA INC | | 5247893 | 00000 | ORDNANCE CORPS | | A247893 | 00000 | ORDNANCE CORPS | | 5150238 | 7X677 | GENERAL MOTORS LLC | | FFW92TYPEAGRADE2CLASSA | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | DEPARTURE FROM CITED DESIGNATOR | AS MODIFIED BY OUTSIDE DIM. | | HOLE DIAMETER | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM | | OVERALL DIAMETER | 0.812 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-636 COND 1 FED SPEC 1ST MATERIAL RESPONSE AND QQ-5-636 COND 2 FED SPEC 2ND MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL OVERALL | | NONDEFINITIVE SPEC/STD DATA | A TYPE AND 2 GRADE AND A CLASS | | PERIPHERAL SHAPE STYLE | ROUND | | THICKNESS | 0.064 INCHES NOMINAL |
|
|