|
|
|
National Stock Number:
5310-00-595-5276
Federal Supply Class:
5310
National Item Identification Number:
005955276
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 235652 | 00088 | ROYAL OAK GAGE INC | | 235652 | 77445 | RTX CORPORATION |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.511 INCHES MINIMUM AND 0.521 INCHES MAXIMUM | | OVERALL DIAMETER | 0.730 INCHES MINIMUM AND 0.750 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 4500 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | COPPER ALLOY 101 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2414 ASSN STD SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | LEAD OVERALL | | THICKNESS | 0.053 INCHES MINIMUM AND 0.061 INCHES MAXIMUM |
|
|