|
|
|
National Stock Number:
5310-00-595-6852
Federal Supply Class:
5310
National Item Identification Number:
005956852
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 1326 | 76110 | MAREMONT CORP | | 19076 | 79150 | DANA AUTOMOTIVE SYSTEMS GROUP, LLC | | 327473 | 1ML14 | BRINKLEY TECHNOLOGY GROUP LLC | | 327473 | 28265 | HERCULES ENGINE CO INC | | 22HS76 | 45152 | OSHKOSH CORP | | 22HS76 | 75Q65 | OSHKOSH DEFENSE LLC | | 6327473 | 1ML14 | BRINKLEY TECHNOLOGY GROUP LLC | | 5150568 | 24617 | GENERAL MOTORS CORP | | 6327473 | 28265 | HERCULES ENGINE CO INC | | 5150568 | 72582 | ROLLS-ROYCE SOLUTIONS AMERICA INC | | 5150568 | 72583 | DETROIT CHEMICAL SUPPLY CO | | 5150568 | 7X677 | GENERAL MOTORS LLC | | 5150568 | 92392 | ALLIS-CHALMERS CORP | | 5310005956852 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE | | K-5150568 | 18954 | KORODY-COLYER CORP A CR INDUSTRIES CO | | N24239PC1 | 24617 | GENERAL MOTORS CORP | | N24252PC10 | 24617 | GENERAL MOTORS CORP | | N24295PC12 | 24617 | GENERAL MOTORS CORP | | N271-038PC5150568 | 24617 | GENERAL MOTORS CORP | | B5150568 | 7U177 | FEDERAL-MOGUL CORPORATION DBA FEDERAL-MOGUL DIV FP DIESEL | | N24239PC1 | 7X677 | GENERAL MOTORS LLC | | N24295PC12 | 7X677 | GENERAL MOTORS LLC | | N24252PC10 | 7X677 | GENERAL MOTORS LLC | | N271-038PC5150568 | 7X677 | GENERAL MOTORS LLC | | FFW92TYPEAGRADE1CLASSF | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | DEPARTURE FROM CITED DESIGNATOR | AS MODIFIED BY ID | | HOLE DIAMETER | 0.4531 INCHES NOMINAL | | OVERALL DIAMETER | 0.750 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-C-576 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | COPPER ALLOY OVERALL | | NONDEFINITIVE SPEC/STD DATA | A TYPE AND 1 GRADE AND F CLASS | | PERIPHERAL SHAPE STYLE | ROUND | | THICKNESS | 0.051 INCHES MINIMUM AND 0.080 INCHES MAXIMUM |
|
|