|
|
|
National Stock Number:
5310-00-595-7015
Federal Supply Class:
5310
National Item Identification Number:
005957015
Description:
WASHER,RECESSED
Detail:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
|
Manufacturer Information:
| 2-965 | 22787 | PRECISION AEROSPACE CORPORATION DBA PRECISION ENGINE CONTROL | | 2-965 | 59501 | UNISON INDUSTRIES LLC | | 2-965 | 77820 | AMPHENOL CORP |
|
Techincal Specification:
| BOTTOM RECESS ANGLE | 88.0 DEGREES MINIMUM AND 92.0 DEGREES MAXIMUM | | BOTTOM RECESS DIAMETER | 0.412 INCHES MINIMUM AND 0.424 INCHES MAXIMUM | | HOLE DIAMETER | 0.386 INCHES MINIMUM AND 0.394 INCHES MAXIMUM | | OUTSIDE DIAMETER | 0.778 INCHES MINIMUM AND 0.781 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | SAE 5010 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL THICKNESS | 0.090 INCHES MINIMUM AND 0.100 INCHES MAXIMUM | | MATERIAL | STEEL OVERALL | | SPECIAL FEATURES | ONE SIDE OF OUTER PERIPHERY CHAMFERED 0.031 IN. BY 45 DEG | | STYLE DESIGNATOR | RECESSED BOTH SIDES | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2400 ASSN STD SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | TOP RECESS ANGLE | 88.0 DEGREES MINIMUM AND 92.0 DEGREES MAXIMUM | | TOP RECESS DIAMETER | 0.412 INCHES MINIMUM AND 0.424 INCHES MAXIMUM |
|
|