|
|
|
National Stock Number:
5310-00-595-7079
Federal Supply Class:
5310
National Item Identification Number:
005957079
Description:
WASHER,RECESSED
Detail:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
|
Manufacturer Information:
| 158562 | 13002 | GOODRICH CORPORATION | | 158562 | 17576 | GOODRICH CORP DBA GOODRICH CORP | | 158562 | 55284 | HONEYWELL INTERNATIONAL INC. | | 3188571PC21 | 59364 | HONEYWELL INTERNATIONAL INC. | | 21192 FIND 9 | 78062 | SARGENT AEROSPACE & DEFENSE, LLC | | 21194 FIND 30 | 78062 | SARGENT AEROSPACE & DEFENSE, LLC | | 852508 | 09786 | ORDNANCE SUPPLY OFFICE | | MS200002C7 | 0P012 | H. V. MODY, INC. | | 52125 FN 64 | 78062 | SARGENT AEROSPACE & DEFENSE, LLC | | MS20002C7 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | 5310PL0821623 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | 5310PL1809515 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | MS20002C7 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | 938.75.11.104 | S4080 | PILATUS AIRCRAFT LTD | | Z00.N5744532472 | F0086 | SOCATA |
|
Techincal Specification:
| MATERIAL | STEEL COMP 1330 OR | | STEEL COMP 4130 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD ALL MATERIAL RESPONSES OVERALL | | SURFACE TREATMENT | CADMIUM AND | | CHROMATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | STYLE DESIGNATOR | RECESSED | | HOLE DIAMETER | 0.441 INCHES MINIMUM AND | | 0.451 INCHES MAXIMUM | | OUTSIDE DIAMETER | 0.771 INCHES MINIMUM AND | | 0.791 INCHES MAXIMUM | | RECESS DIAMETER | 0.543 INCHES MINIMUM AND | | 0.557 INCHES MAXIMUM | | MATERIAL THICKNESS | 0.068 INCHES MINIMUM AND | | 0.088 INCHES MAXIMUM | | RECESS ANGLE | 89.0 DEGREES MINIMUM AND | | 91.0 DEGREES MAXIMUM |
|
|