|
|
|
National Stock Number:
5310-00-595-7142
Federal Supply Class:
5310
National Item Identification Number:
005957142
Description:
WASHER,LOCK
Detail:
A washer which is usually round with a centrally located hole. Its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. It may be made of one or two pieces
|
Manufacturer Information:
| 12Z3038-36 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | FFW84CLASSASTYLE3 | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | MS35339-21 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| HARDNESS RATING | 45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM | | HOLE DIAMETER | 0.115 INCHES MINIMUM AND 0.124 INCHES MAXIMUM | | OUTSIDE DIAMETER | 0.226 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | FED STD 66,AISI C1060 THRU C1080 OR SAE 1060 THRU 1080 MIL STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL THICKNESS | 0.031 INCHES MINIMUM | | MATERIAL | STEEL OVERALL | | NONDEFINITIVE SPEC/STD DATA | A CLASS AND 3 STYLE | | STYLE DESIGNATOR | SPLIT HELICAL-RIGHT HAND | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,OR QQ-Z-325 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OR ZINC OVERALL |
|