|
|
|
National Stock Number:
5310-00-596-4637
Federal Supply Class:
5310
National Item Identification Number:
005964637
Description:
WASHER,RECESSED
Detail:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
|
Manufacturer Information:
| 00274 | 14153 | DEFENSE LOGISTICS AGENCY DBA DEFENSE SUPPLY CENTER PHILADELPHIA | | 192-12698 | 43999 | THE BOEING COMPANY |
|
Techincal Specification:
| MATERIAL | ALUMINUM ALLOY 7075 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/9 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | ANODIZE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | STYLE DESIGNATOR | RECESSED | | HOLE DIAMETER | 0.260 INCHES MINIMUM AND | | 0.265 INCHES MAXIMUM | | OUTSIDE DIAMETER | 0.662 INCHES MINIMUM AND | | 0.667 INCHES MAXIMUM | | RECESS DIAMETER | 0.486 INCHES MINIMUM AND | | 0.506 INCHES MAXIMUM | | MATERIAL THICKNESS | 0.117 INCHES MINIMUM AND | | 0.127 INCHES MAXIMUM | | RECESS ANGLE | 99.5 DEGREES MINIMUM AND | | 100.5 DEGREES MAXIMUM | | SURFACE FINISH | 63.0 MICROINCHES BOTTOM | | 63.0 MICROINCHES INNER | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 43999 | | DESIGN CONTROL REFERENCE | 192-12698 |
|
|