|
|
|
National Stock Number:
5310-00-596-4780
Federal Supply Class:
5310
National Item Identification Number:
005964780
Description:
WASHER,SHOULDERED AND RECESSED
Detail:
A washer, round in shape, having a centrally located hole. One bearing surface is flat, the other surface is in the form of a raised shoulder (boss) having a flat bearing surface. Either or both of the bearing surfaces must be broken by a counterbore, countersink, or similar shaped recess. The thickness of the shoulder (boss) must not exceed 25 percent of the shoulder (boss) diameter. For items having a shoulder (boss) of greater thickness, use BEARING, SLEEVE; BUSHING, SLEEVE; or SPACER, SLEEVE. Excludes INSULATOR, WASHER and thrust type washers.
|
Manufacturer Information:
| CVC770-1 | 80378 | TRIUMPH AEROSTRUCTURES, LLC |
|
Techincal Specification:
| HOLE DIAMETER | 0.190 INCHES MINIMUM AND 0.193 INCHES MAXIMUM | | OUTSIDE DIAMETER | 0.551 INCHES MINIMUM AND 0.555 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/8 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL THICKNESS | 0.038 INCHES NOMINAL | | MATERIAL | ALUMINUM ALLOY 6061 OVERALL | | RECESS ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM | | SHOULDER HEIGHT | 0.039 INCHES NOMINAL | | SHOULDER DIAMETER | 0.341 INCHES MINIMUM AND 0.343 INCHES MAXIMUM | | STYLE DESIGNATOR | SHOULDERED AND RECESSED | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | ANODIZE OVERALL |
|
|