|
|
|
National Stock Number:
5310-00-596-6339
Federal Supply Class:
5310
National Item Identification Number:
005966339
Description:
NUT,SLEEVE
Detail:
AN INTERNALLY THREADED ITEM WITH A CYLINDRICAL AND/OR SQUARE, HEXAGONAL, OCTAGONAL, OR DODECAGONAL OUTER PERIPHERY (PARALLEL TO THE THREADED AXIS) A PORTION(S) OF WHICH MAY OR MAY NOT BE ENLARGED, FORMING A FLANGE(S) AND/OR SHOULDER(S). ITEMS NOT HAVING AN ENLARGED OUTER PORTION MAY BE THREADED, A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS HAVING AN ENLARGED OUTER PORTION (FLANGE(S) OR SHOULDER(S)) MAY BE THREADED THE FULL LENGTH, THREADED A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS TAPPED FROM BOTH ENDS SHALL HAVE EITHER RIGHT-HAND THREADS ON BOTH ENDS OR LEFT-HAND THREADS ON BOTH ENDS. FOR ITEMS CONFORMING TO ANY OF THE ABOVE AND HAVING A LENGTH OVERALL EXCEEDING TWO TIMES THE LARGEST OUTSIDE DIAMETER OR WIDTH ACROSS FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. FOR ITEMS WITH AN OUTSIDE CONTOUR THAT IS THE SAME THE FULL LENGTH, HAVING A CONTINUOUS THREAD THROUGH ITS ENTIRE LENGTH, AND THE LENGTH DOES NOT EXCEED TWO TIMES THE DIAMETER OR WIDTH ACROSS THE FLATS USE NUT (1), PLAIN (AS MODIFIED). EXCLUDES NUT (1), PLAIN, CAP. SEE ALSO TURNBUCKLE BODY.
|
Manufacturer Information:
| A36042 | 55176 | VSE AVIATION, INC. |
|
Techincal Specification:
| CROSS-SECTIONAL SHAPE | ROUND FLANGE | | CROSS-SECTIONAL SHAPE | ROUND NUT | | FLANGE DIAMETER | 0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM | | FLANGE THICKNESS | 0.068 INCHES MINIMUM AND 0.078 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 303 OVERALL | | NOMINAL THREAD SIZE | 0.099 INCHES | | NUT DIAMETER | 0.151 INCHES MINIMUM AND 0.154 INCHES MAXIMUM | | NUT LENGTH | 0.082 INCHES MINIMUM AND 0.092 INCHES MAXIMUM | | NUT STYLE | SLEEVE | | THREAD CLASS | 2B | | THREAD DIRECTION | RIGHT-HAND | | THREAD SERIES | UNC | | THREAD QUANTITY PER INCH | 48 |
|
|