|
|
|
National Stock Number:
5310-00-596-6626
Federal Supply Class:
5310
National Item Identification Number:
005966626
Description:
WASHER,RECESSED
Detail:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
|
Manufacturer Information:
| 345123 | 98897 | LOCKHEED MARTIN CORP |
|
Techincal Specification:
| MATERIAL | STEEL COMP 8630 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6050 COND F4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | STYLE DESIGNATOR | RECESSED | | HOLE DIAMETER | 0.755 INCHES MINIMUM AND | | 0.775 INCHES MAXIMUM | | OUTSIDE DIAMETER | 1.240 INCHES MINIMUM AND | | 1.260 INCHES MAXIMUM | | RECESS DIAMETER | 0.985 INCHES MINIMUM AND | | 1.005 INCHES MAXIMUM | | MATERIAL THICKNESS | 0.170 INCHES MINIMUM AND | | 0.190 INCHES MAXIMUM | | RECESS ANGLE | 88.0 DEGREES MINIMUM AND | | 92.0 DEGREES MAXIMUM | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 98897 | | DESIGN CONTROL REFERENCE | 345123 |
|
|