|
|
|
National Stock Number:
5310-00-596-7254
Federal Supply Class:
5310
National Item Identification Number:
005967254
Description:
NUT,SLEEVE
Detail:
AN INTERNALLY THREADED ITEM WITH A CYLINDRICAL AND/OR SQUARE, HEXAGONAL, OCTAGONAL, OR DODECAGONAL OUTER PERIPHERY (PARALLEL TO THE THREADED AXIS) A PORTION(S) OF WHICH MAY OR MAY NOT BE ENLARGED, FORMING A FLANGE(S) AND/OR SHOULDER(S). ITEMS NOT HAVING AN ENLARGED OUTER PORTION MAY BE THREADED, A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS HAVING AN ENLARGED OUTER PORTION (FLANGE(S) OR SHOULDER(S)) MAY BE THREADED THE FULL LENGTH, THREADED A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS TAPPED FROM BOTH ENDS SHALL HAVE EITHER RIGHT-HAND THREADS ON BOTH ENDS OR LEFT-HAND THREADS ON BOTH ENDS. FOR ITEMS CONFORMING TO ANY OF THE ABOVE AND HAVING A LENGTH OVERALL EXCEEDING TWO TIMES THE LARGEST OUTSIDE DIAMETER OR WIDTH ACROSS FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. FOR ITEMS WITH AN OUTSIDE CONTOUR THAT IS THE SAME THE FULL LENGTH, HAVING A CONTINUOUS THREAD THROUGH ITS ENTIRE LENGTH, AND THE LENGTH DOES NOT EXCEED TWO TIMES THE DIAMETER OR WIDTH ACROSS THE FLATS USE NUT (1), PLAIN (AS MODIFIED). EXCLUDES NUT (1), PLAIN, CAP. SEE ALSO TURNBUCKLE BODY.
|
Manufacturer Information:
| 231534 | 56232 | LOCKHEED MARTIN CORPORATION | | 654371 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | SRS654371 | 14153 | DEFENSE LOGISTICS AGENCY DBA DEFENSE SUPPLY CENTER PHILADELPHIA |
|
Techincal Specification:
| CROSS-SECTIONAL SHAPE | HEXAGONAL FLANGE | | CROSS-SECTIONAL SHAPE | ROUND NUT | | FLANGE WIDTH ACROSS FLATS | 0.375 INCHES NOMINAL | | FLANGE THICKNESS | 0.095 INCHES MINIMUM AND 0.105 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-764,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 303 OVERALL | | NOMINAL THREAD SIZE | 0.138 INCHES | | NUT DIAMETER | 0.182 INCHES MINIMUM AND 0.183 INCHES MAXIMUM | | NUT LENGTH | 0.399 INCHES MINIMUM AND 0.401 INCHES MAXIMUM | | NUT STYLE | SLEEVE | | SPECIAL FEATURES | UNDERCUT 0.138 DIA UNDER HEAD 0.015 IN W. BY 0.010 IN DEEP | | SURFACE TREATMENT | PASSIVATE OVERALL | | THREAD CLASS | 3B | | THREAD DIRECTION | RIGHT-HAND | | THREAD SERIES | UNC | | THREAD QUANTITY PER INCH | 32 |
|
|