|
|
|
National Stock Number:
5310-00-596-9465
Federal Supply Class:
5310
National Item Identification Number:
005969465
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 122282-000 | 81413 | BAE SYSTEMS INFORMATION AND ELECTRONIC SYSTEMS INTEGRATION INC. | | 165-395 | 50237 | CAE USA INC. | | 511986-3 | 07632 | SERRA MANUFACTURING CORPORATION | | 993351-3C | 82577 | RAYTHEON COMPANY | | 5710-84-30P | 86928 | SEASTROM MANUFACTURING CO INC | | Y77114343 | K0131 | GOODRICH LIMITED |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.375 INCHES MINIMUM AND 0.380 INCHES MAXIMUM | | OVERALL DIAMETER | 0.547 INCHES MINIMUM AND 0.578 INCHES MAXIMUM | | MATERIAL | STEEL COMP 303 OR STEEL COMP 1340H OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | SURFACE TREATMENT | PASSIVATE OVERALL | | THICKNESS | 0.030 INCHES MINIMUM AND 0.032 INCHES MAXIMUM |
|