|
|
|
National Stock Number:
5310-00-599-1702
Federal Supply Class:
5310
National Item Identification Number:
005991702
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 512-1030-912 | 07421 | L3HARRIS INTERSTATE ELECTRONICS CORPORATION | | 812964 | 99251 | MISSION SYSTEMS DAVENPORT INC. | | 812964-1 | 99251 | MISSION SYSTEMS DAVENPORT INC. |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HARDNESS RATING | 25.0 SHORE DUROMETER A NOMINAL | | HOLE DIAMETER | 0.188 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | 12602,FSCM 03494 MFR REF SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | RUBBER SYNTHETIC OVERALL | | III MINIMUM TENSILE STRENGTH | 200 POUNDS PER SQUARE INCH | | PERIPHERAL SHAPE STYLE | ROUND | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL DIAMETER | 0.312 INCHES NOMINAL | | THICKNESS | 0.062 INCHES NOMINAL |
|
|