|
|
|
National Stock Number:
5310-00-599-3480
Federal Supply Class:
5310
National Item Identification Number:
005993480
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 52129-5901-998632ALT3PC54401621 | 80064 | NAVAL SHIP SYSTEMS COMMAND | | 52129-5901-998641ALT1PC2P | 80064 | NAVAL SHIP SYSTEMS COMMAND | | 54MAD1343N3REVCPC13 | 10855 | CARRIER CORP | | 5H40-1621 | 10855 | CARRIER CORP | | N400-1PC5H40-1621 | 10855 | CARRIER CORP | | 571-3801-1444715REVAPC112 | 80064 | NAVAL SHIP SYSTEMS COMMAND | | N9000-1ALT1PC2D | 10855 | CARRIER CORP |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 1.500 INCHES NOMINAL | | OVERALL DIAMETER | 2.000 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | HH-P-46 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | ASBESTOS OVERALL | | MINIMUM TENSILE STRENGTH | 1800 POUNDS PER SQUARE INCH | | PERIPHERAL SHAPE STYLE | ROUND | | THICKNESS | 0.070 INCHES NOMINAL |
|