5330-00-599-9039 GASKET Index 5330-00-599-9042 GASKET

National Stock Number:
5310-00-599-9041

Federal Supply Class:
5310

National Item Identification Number:
005999041

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.


Manufacturer Information:
2061-82PC0396169ELECTRIC BOAT CORPORATION
2062-116PCN396169ELECTRIC BOAT CORPORATION
240-2200-1036052REVAPCN380064NAVAL SHIP SYSTEMS COMMAND
2462-112PCP396169ELECTRIC BOAT CORPORATION
2261-82ALT5PC0396169ELECTRIC BOAT CORPORATION
2262-112WALT3WPCP396169ELECTRIC BOAT CORPORATION
261602PC610001NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER
346-3801-484655ALT1PCV380064NAVAL SHIP SYSTEMS COMMAND
389101ALT5PC0380064NAVAL SHIP SYSTEMS COMMAND
389101PC0380064NAVAL SHIP SYSTEMS COMMAND
389226WALT3WPCP380064NAVAL SHIP SYSTEMS COMMAND
389230PCN380064NAVAL SHIP SYSTEMS COMMAND
2764-50ALT1PCV396169ELECTRIC BOAT CORPORATION
2462-116ALT1PCN396169ELECTRIC BOAT CORPORATION
532677PCP380064NAVAL SHIP SYSTEMS COMMAND
532681ALT1PCN380064NAVAL SHIP SYSTEMS COMMAND
FF-W-92B81348FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC


Techincal Specification:
CENTER HOLE SHAPE STYLEROUND
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
HOLE DIAMETER1.120 INCHES MINIMUM AND 1.130 INCHES MAXIMUM
OVERALL DIAMETER1.620 INCHES MINIMUM AND 1.630 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-C-576 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIALCOPPER ALLOY OVERALL
PERIPHERAL SHAPE STYLEROUND
THICKNESS0.1285 INCHES NOMINAL


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us