|
|
|
National Stock Number:
5310-00-600-3529
Federal Supply Class:
5310
National Item Identification Number:
006003529
Description:
NUT,PLAIN,CAP
Detail:
AN ITEM INTERNALLY THREADED FROM ONE END, AND COMPLETELY INCLOSED ON THE OPPOSITE END. THE OUTER PERIPHERY PARALLEL TO THE THREADED AXIS MAY BE SQUARE, CYLINDRICAL, HEXAGONAL, OCTAGONAL, OR DODECAGONAL AND TAPER TO A CONE OR DOME SHAPE ON THE CLOSED END. FOR LIKE ITEMS WHICH ARE STAMPED OR FORMED FROM SHEET STOCK, SEE NUT (1), STAMPED. FOR SIMILAR ITEMS WHICH ARE FLAT ON TOP AND BOTTOM SEE NUT (1), SLEEVE OR POST, ELECTRICAL-MECHANICAL EQUIPMENT.
|
Manufacturer Information:
| 124D305 | 0AHP5 | CURTISS-WRIGHT CONTROLS, INC. |
|
Techincal Specification:
| THREAD SERIES | UNF | | NOMINAL THREAD SIZE | 0.375 INCHES | | THREAD QUANTITY PER INCH | 24 | | THREAD CLASS | 3B | | THREAD DIRECTION | RIGHT-HAND | | MATERIAL | STEEL COMP 410 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5613 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | NUT STYLE | CAP | | NUT HEIGHT | 0.360 INCHES MINIMUM AND | | 0.380 INCHES MAXIMUM | | WIDTH ACROSS FLATS | 0.616 INCHES MINIMUM AND | | 0.625 INCHES MAXIMUM | | HOLE CONFIGURATION STYLE | CONFIGURATION B | | HOLE TYPE AND QUANTITY | 2 DRILLED | | DRILLED HOLE DIAMETER | 0.070 INCHES NOMINAL | | BEARING SURFACE TYPE | WASHER FACED | | COUNTERSINK ANGLE | 88.0 DEGREES MINIMUM AND | | 92.0 DEGREES MAXIMUM NUT | | BEARING SURFACE FINISH | 200.0 MICROINCHES | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 0AHP5 | | DESIGN CONTROL REFERENCE | 124D305 |
|
|