|
|
|
National Stock Number:
5310-00-618-9446
Federal Supply Class:
5310
National Item Identification Number:
006189446
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 306084 | 06090 | TE CONNECTIVITY CORPORATION | | 306084 | 77445 | RTX CORPORATION | | 354290 | 27068 | DCP SPRING ACQUISITION COMPANY, INC. | | 354290 | 31633 | ALINABAL HOLDINGS CORPORATION | | 306084 | JA269 | TOKYO JUDOI KOGYO K.K. | | 306084 | S0554 | TOKYO JUDOGI KOGYO CO. | | 354290 | 33615 | ENJET AERO MANCHESTER LLC | | 354290 | 51535 | CREST GOOD MANUFACTURING CO INC | | 354290 | 77445 | RTX CORPORATION | | CVC754-328E17 | 80378 | TRIUMPH AEROSTRUCTURES, LLC | | 354290 | 81924 | ATOMIC ENERGY COMMISSION OAK RIDGE OPNS OFFICE | | 354290 | JA269 | TOKYO JUDOI KOGYO K.K. | | 354290 | S0554 | TOKYO JUDOGI KOGYO CO. |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HEAT TREATMENT | F-AS FABRICATED | | HOLE DIAMETER | 0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM | | OVERALL DIAMETER | 0.430 INCHES MINIMUM AND 0.450 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 4001 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | ALUMINUM ALLOY 1100 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | SURFACE FINISH | 63.0 MICROINCHES BOTTOM | | SURFACE FINISH | 63.0 MICROINCHES TOP | | THICKNESS | 0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM |
|
|