|
|
|
National Stock Number:
5310-00-619-2298
Federal Supply Class:
5310
National Item Identification Number:
006192298
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 10-94571 | 28839 | TELEDYNE INDUSTRIES INC TELEDYNE POWER SYSTEMS DIV | | 10-94571 | 59501 | UNISON INDUSTRIES LLC | | 10-94571 | 77820 | AMPHENOL CORP |
|
Techincal Specification:
| MATERIAL | STEEL COMP 1010 OR | | STEEL COMP 1020 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5044 ASSN STD 1ST MATERIAL RESPONSE AND | | AMS 5045 ASSN STD 2ND MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2400 ASSN STD SINGLE TREATMENT RESPONSE OVERALL | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 0.376 INCHES MINIMUM AND | | 0.380 INCHES MAXIMUM | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 0.589 INCHES MINIMUM AND | | 0.599 INCHES MAXIMUM | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.0620 INCHES MINIMUM AND | | 0.0630 INCHES MAXIMUM | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 28839 | | DESIGN CONTROL REFERENCE | 10-94571 |
|
|