|
|
|
National Stock Number:
5310-00-619-3019
Federal Supply Class:
5310
National Item Identification Number:
006193019
Description:
NUT,PLAIN,ROUND
Detail:
A nut, circular in shape, which may have wrenching facilities such as flats, holes, protrusions, slots or splines in or on the periphery or in the face opposite the bearing surface. For items having a thickness (or height) exceeding two times the outside diameter, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. See also NUT (1), PLAIN, KNURLED. (When height or thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)
|
Manufacturer Information:
| 6193019 | 19204 | ARMY, UNITED STATES DEPARTMENT OF THE |
|
Techincal Specification:
| THREAD SERIES | UNS | | NOMINAL THREAD SIZE | 2.312 INCHES | | THREAD QUANTITY PER INCH | 16 | | THREAD CLASS | 3B | | THREAD DIRECTION | RIGHT-HAND | | MATERIAL | STEEL OVERALL | | SURFACE TREATMENT | OXIDE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-13924,CL2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | NUT STYLE | ROUND | | DRIVE POINT DEPTH | 0.250 INCHES MINIMUM AND | | 0.253 INCHES MAXIMUM | | NUT DIAMETER | 3.190 INCHES NOMINAL | | NUT THICKNESS | 0.840 INCHES NOMINAL | | DRIVE POINT WIDTH | 0.380 INCHES NOMINAL | | DRIVE POINT QUANTITY | 2 | | HOLE CONFIGURATION STYLE | CONFIGURATION J | | HOLE TYPE AND QUANTITY | 2 DRILLED | | DRILLED HOLE DIAMETER | 0.190 INCHES NOMINAL | | COUNTERSINK ANGLE | 45.0 DEGREES NOMINAL NUT | | SPECIAL FEATURES | 2 MOUNTING HOLES 0.190-24UNC-3B COUNTERSUNK 82 DEG TO 0.390 IN. DIA 90 DEG FROM WRENCHING SLOTS | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 19204 | | DESIGN CONTROL REFERENCE | 6193019 |
|
|