| LOCKING FEATURE | PREVAILING TORQUE WITH NONMETALLIC INSERT |
| THREAD DIRECTION | RIGHT-HAND |
| NUT STYLE | PLATE |
| MATERIAL | STEEL COMP 1212 NUT |
| THREAD SERIES | UNF |
| NOMINAL THREAD SIZE | 0.190 INCHES |
| THREAD QUANTITY PER INCH | 32 |
| THREAD CLASS | 3B |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS4037 ASSN STD SINGLE MATERIAL RESPONSE BASE |
| AMS5010 ASSN STD SINGLE MATERIAL RESPONSE NUT |
| SURFACE TREATMENT | ANODIZE BASE |
| CADMIUM NUT |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE BASE |
| QQ-P-416,TYPE 1,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE NUT |
| NUT LENGTH | 0.954 INCHES MINIMUM AND |
| 0.984 INCHES MAXIMUM |
| NUT HEIGHT | 0.266 INCHES MINIMUM AND |
| 0.296 INCHES MAXIMUM |
| PLATE THICKNESS | 0.027 INCHES MINIMUM AND |
| 0.037 INCHES MAXIMUM |
| PLATE WIDTH | 0.516 INCHES MINIMUM AND |
| 0.546 INCHES MAXIMUM |
| NUT MOUNTING PROVISION | COUNTERSUNK HOLES |
| MOUNTING HOLE COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL |
| MOUNTING PROVISION LOCATION | OPPOSITE NUT PROJECTION SIDE |
| MOUNTING HOLE ARRANGEMENT STYLE | 2 HOLES |
| MOUNTING HOLE DIAMETER | 0.098 INCHES MINIMUM AND |
| 0.103 INCHES MAXIMUM |
| DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER | 0.339 INCHES MINIMUM AND |
| 0.349 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | 0.686 INCHES MINIMUM AND |
| 0.690 INCHES MAXIMUM |
| TEMP RATING | 250.0 DEG FAHRENHEIT NOMINAL |
| FEATURES PROVIDED | FLOATING NUT |
| NONDEFINITIVE SPEC/STD DATA | 250 DEG F TYPE |
| DEPARTURE FROM CITED DOCUMENT | AS MODIFIED BY MATERIAL |