|
|
|
National Stock Number:
5310-00-619-7114
Federal Supply Class:
5310
National Item Identification Number:
006197114
Description:
NUT,SLEEVE
Detail:
AN INTERNALLY THREADED ITEM WITH A CYLINDRICAL AND/OR SQUARE, HEXAGONAL, OCTAGONAL, OR DODECAGONAL OUTER PERIPHERY (PARALLEL TO THE THREADED AXIS) A PORTION(S) OF WHICH MAY OR MAY NOT BE ENLARGED, FORMING A FLANGE(S) AND/OR SHOULDER(S). ITEMS NOT HAVING AN ENLARGED OUTER PORTION MAY BE THREADED, A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS HAVING AN ENLARGED OUTER PORTION (FLANGE(S) OR SHOULDER(S)) MAY BE THREADED THE FULL LENGTH, THREADED A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS TAPPED FROM BOTH ENDS SHALL HAVE EITHER RIGHT-HAND THREADS ON BOTH ENDS OR LEFT-HAND THREADS ON BOTH ENDS. FOR ITEMS CONFORMING TO ANY OF THE ABOVE AND HAVING A LENGTH OVERALL EXCEEDING TWO TIMES THE LARGEST OUTSIDE DIAMETER OR WIDTH ACROSS FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. FOR ITEMS WITH AN OUTSIDE CONTOUR THAT IS THE SAME THE FULL LENGTH, HAVING A CONTINUOUS THREAD THROUGH ITS ENTIRE LENGTH, AND THE LENGTH DOES NOT EXCEED TWO TIMES THE DIAMETER OR WIDTH ACROSS THE FLATS USE NUT (1), PLAIN (AS MODIFIED). EXCLUDES NUT (1), PLAIN, CAP. SEE ALSO TURNBUCKLE BODY.
|
Manufacturer Information:
| 2578605-001A | 06848 | HONEYWELL INTERNATIONAL INC | | 2578605-001A | 13002 | GOODRICH CORPORATION | | 2578605-001A | 17576 | GOODRICH CORP DBA GOODRICH CORP | | 2578605-001A | 55284 | HONEYWELL INTERNATIONAL INC. | | 2578605-001A | 6K4C8 | GOODRICH CORPORATION |
|
Techincal Specification:
| COUNTERSINK ANGLE | 90.0 DEGREES NOMINAL NUT | | CROSS-SECTIONAL SHAPE | ROUND FLANGE | | CROSS-SECTIONAL SHAPE | ROUND NUT | | FLANGE DIAMETER | 0.365 INCHES NOMINAL | | FLANGE THICKNESS | 0.095 INCHES MINIMUM AND 0.105 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 4130 OVERALL | | NOMINAL THREAD SIZE | 0.112 INCHES | | NUT DIAMETER | 0.243 INCHES MINIMUM AND 0.248 INCHES MAXIMUM | | NUT STYLE | SLEEVE | | NUT LENGTH | 0.470 INCHES MINIMUM AND 0.500 INCHES MAXIMUM | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | CP-0480 FSCM 06848 MFR REF SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | TEST DATA DOCUMENT | 81349-MIL-I-6870 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | THREAD DIRECTION | RIGHT-HAND | | THREAD CLASS | 2B | | THREAD LENGTH | 0.250 INCHES NOMINAL OVERALL | | THREAD SERIES | UNC | | THREAD QUANTITY PER INCH | 40 |
|
|